What's Up Everyone! - Yamaha SCR950 Forum
 1Likes
Reply
 
LinkBack Thread Tools
post #1 of 11 (permalink) Old 08-06-2020, 12:12 AM Thread Starter
Junior Member
 
Join Date: May 2020
Location: Rhode Island
Posts: 8
What's Up Everyone!

I'd like to introduce myself to you folks, my name is Matt. I live in Rhode Island and I've had my SCR since January.

Prior to this I had a Suzuki RM80 as a kid, a 1979 Suzuki GS500, and a 1975 Honda CB500T that I never should have sold. I've been reading this forum for a little while now and have found a lot of helpful information on here, thank you for that.

I look forward to interacting with you all! I'm going to start a separate thread to showcase my bike for some possible suggestions/opinions.

-Matt
yoitsemo likes this.
tiedran is offline  
post #2 of 11 (permalink) Old 08-06-2020, 01:14 AM Thread Starter
Junior Member
 
Join Date: May 2020
Location: Rhode Island
Posts: 8
Well, I realized that I should have just posted this in this thread but I can't figure out how to edit my original post so here we are.

I bought my SCR in January with 5,500 miles and since then I've ridden over 3000 miles.

I've made some upgrades and slight modifications to include:

-Michelin Anakee 3 tires, the grip is phenomenal.
-Front and rear EBC sintered brake pads
-OEM Adventure pegs
-OEM skidplate
-Baron Raise Up kit
-Philips Night Breaker headlight bulb
-Vance and Hines Competition Series muffler
-Renthal Street handlebars, size medium
-Vans Waffle Grips
-Round fork reflectors and removed rear reflectors
-Removed meter bezel

I've also done a little bit of maintenance along the way. Spark plugs and air filter were replaced for new OEM parts as well as a fresh OEM Yamalube oil and filter change despite the fresh dealer oil change. I've adjusted the clutch lever and throttle flee-play, and adjusted the shifter and brake pedals to my preference. I've also lubricated just about every moving part of the controls and accessories.

I'm currently in the middle of a neck bearing job in my basement which I will hopefully be finishing tomorrow morning before work. (I work as an X-Ray Tech.) Before I button it up tomorrow, I'll change the front fork oil since I have them off the bike anyways.

I never take pictures while I'm tinkering but I want to try to make an effort to get some pictures along the way and post them in here as just a way to share with you all.

Heres a picture before I switched back to stock mirrors and changed the grips.
Attached Thumbnails
Click image for larger version

Name:	IMG_2538.jpg
Views:	149
Size:	297.0 KB
ID:	17416  
tiedran is offline  
post #3 of 11 (permalink) Old 08-06-2020, 10:13 AM
Senior Member
 
yoitsemo's Avatar
 
Join Date: Aug 2017
Location: Gainesville, FL
Posts: 219
Welcome!

Let us know how the neck bearing job goes and how the ride the feels afterwards. Been wondering if it I can do it myself or if I should entrust to a "pro".
yoitsemo is offline  
 
post #4 of 11 (permalink) Old 08-06-2020, 01:41 PM
Junior Member
 
Join Date: Apr 2019
Posts: 18
Welcome! I just ordered the Anakee 3's and can't wait for the improved ride and handling. How long have you had those tires on and how is the tread life on them?
kamotejoe is offline  
post #5 of 11 (permalink) Old 08-26-2020, 12:04 PM Thread Starter
Junior Member
 
Join Date: May 2020
Location: Rhode Island
Posts: 8
The Anakee 3's are great, they handle very confidently and they're really predictable on pavement and also dirt roads. I've had them for about 3,500 miles and they still look and feel new.

I finished the neck bearing job a day or two after that original post and I can confirm that my handlebar wobble is completely gone. I used to get violent wobble after a few seconds of letting go of the handlebars depending on the speed but I can now remove both hands and coast at all speeds with zero wobble.

The job was a bit of a PITA because the upper race did not have a relief cut in the neck to get a bite on the bearing race for tapping it out. I also tried a laterally expanding race removal tool but there was just nothing to grab onto. Eventually with some creative effort and a helping hand, it was out.

While I was in there I drained the fork oil, which turned out to be pretty cloudy, and added fresh Mobil 1 synthetic ATF (apparently it's commonly used in lieu of fork oil.) The front end feels a bit more refined after the new oil. It's definitely a noticeable improvement.
tiedran is offline  
post #6 of 11 (permalink) Old 09-05-2020, 09:55 AM
Senior Member
 
yoitsemo's Avatar
 
Join Date: Aug 2017
Location: Gainesville, FL
Posts: 219
Thanks for the update and I'm so glad it went relatively well. I'm not sure if I've got the tools and resources to do it on my own so all the info I can gather will hopefully be usable to take to my shop that handles my tire changes. Cheers to the smooth riding.

Quote:
Originally Posted by tiedran View Post
The Anakee 3's are great, they handle very confidently and they're really predictable on pavement and also dirt roads. I've had them for about 3,500 miles and they still look and feel new.

I finished the neck bearing job a day or two after that original post and I can confirm that my handlebar wobble is completely gone. I used to get violent wobble after a few seconds of letting go of the handlebars depending on the speed but I can now remove both hands and coast at all speeds with zero wobble.

The job was a bit of a PITA because the upper race did not have a relief cut in the neck to get a bite on the bearing race for tapping it out. I also tried a laterally expanding race removal tool but there was just nothing to grab onto. Eventually with some creative effort and a helping hand, it was out.

While I was in there I drained the fork oil, which turned out to be pretty cloudy, and added fresh Mobil 1 synthetic ATF (apparently it's commonly used in lieu of fork oil.) The front end feels a bit more refined after the new oil. It's definitely a noticeable improvement.
yoitsemo is offline  
post #7 of 11 (permalink) Old 09-05-2020, 11:47 PM
Member
 
Big-X's Avatar
 
Join Date: Sep 2017
Posts: 54
How did the neck bearing job go ?
Big-X is offline  
post #8 of 11 (permalink) Old 09-14-2020, 09:38 AM Thread Starter
Junior Member
 
Join Date: May 2020
Location: Rhode Island
Posts: 8
In reply to Big-X,

The neck bearing job could have gone smoother but overall not a bad job at all of you like digging into things. I'd say it took me a couple mornings to get it done at a slow and relaxed pace while referencing the Bolt service manual from Yamaha.

I commented on it in more detail a few posts up from this one.
tiedran is offline  
post #9 of 11 (permalink) Old 09-14-2020, 09:42 AM Thread Starter
Junior Member
 
Join Date: May 2020
Location: Rhode Island
Posts: 8
Quote:
Originally Posted by yoitsemo View Post
Thanks for the update and I'm so glad it went relatively well. I'm not sure if I've got the tools and resources to do it on my own so all the info I can gather will hopefully be usable to take to my shop that handles my tire changes. Cheers to the smooth riding.
Likewise. If it's an experienced shop they likely will have dealt with this in the past and may have some tricks to get them out that I didn't think of.
tiedran is offline  
post #10 of 11 (permalink) Old 09-16-2020, 09:51 AM
Junior Member
 
Join Date: Jun 2018
Posts: 4
Hello! Your bike looks awesome! I think the SCR looks so much better with the rear end lifted up a wee bit. Awesome to hear about the neck bearing as that is one of my next projects (that and tires). I can not wait to be able to remove my hands from the handlebars without all the wobble. LOL
fatratgoon is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome