anyone install a Two Brothers M2 Slip on before?

Folsom_Blues said:

https://www.revzilla.com/motorcycle...yXm3sEVofmgwX_0okH8c_CHAj3gs7X3YaAtVIEALw_wcB

Revzilla says it wont fit, anyone have any recommendations on getting it to? Thanks in advance.

Click to expand...

I can’t tell if it comes with its own mount or not.....I’m guessing not?

If that’s the case, you’re going to struggle, as the stock SCR pipe is upswept compared to the horizontal one on the Bolt, so your muffler is not going to meet the OEM SCR (i.e. upswept) mount. Might have to look at an aftermarket/custom exhaust mount?
Ben

Might have to get/make a mid pipe to make the transition?

[email protected] said:

Might have to get/make a mid pipe to make the transition?

Click to expand...

That’s the other option - would have to be just the right length to nicely meet the stock mount tho.
Ben

Thanks for the response guys. I will probably go a different route.

Folsom_Blues said:

Thanks for the response guys. I will probably go a different route.

Click to expand...

I went with The DanMoto pipe , same open concept and way less dollar$ and I’m super happy with it. It’s a bit load on an in tuned bike but after I got Ivan’s tune . I quieted back down a bit and no popping Both worth every penny I say

Folsom_Blues said:

Thanks for the response guys. I will probably go a different route.

Click to expand...

Typo. A bit loud on an untuned bike