Yamaha SCR950 Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
I've seen several YouTube videos of folks modifying Bolt mufflers using a metal hole saw (1.25") on an extension to make a hole in the front baffle. Has anyone tried this on an SCR muffler and/or have any comments pro or con?
 

·
Registered
Joined
·
6 Posts
I recently decided that my SCR needed a little louder voice as well. Instead of using the extension and hole saw, I opted for a different route. I just removed the end cap off of the muffler and drilled about 8 holes with a 3/8" drill bit. The bike is definitely louder, and has a throaty sound. It's not much, but it did enough for me at the moment.

Today I ordered a Freedom Combat slip on to finally upgrade that ugly stock can and give me some nice sound coming out of the bike!
 

·
Registered
Joined
·
106 Posts
I just took a hole saw on a extension and drilled the core out. Very easy to do and took about 5 min. Deep throaty sound now. Easiest mod I've done with great results!
 
  • Like
Reactions: yoitsemo

·
Registered
Joined
·
1,292 Posts
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top