Yamaha SCR950 Forum banner

Electrical mystery

605 Views 6 Replies 4 Participants Last post by  Gr8fulDean
Hey guys!
I got an SCR950 about a month and a half ago and I was riding one day and noticed that the tail light fell of the frame, it wasn’t the stock one it was a universal one from dime city cycles and and I decided to just replace that with an LED strip and I also changed the turn signals to LED’s.
My problem arises today, I was putting on the LED strip and everything was working fine, turn signals, headlight and obviously not the tail light because I hadn’t yet installed it. And after trying to install it it wasn’t working and for some reason now my headlight, horn or turn signals won’t work. The bike starts just fine and the display works perfectly fine as well. I’ve given up on trying to figure this mystery out on my own so any help would be appreciated

thanks!
1 - 7 of 7 Posts
Check the fuses.
Yup! Just checked and found the turn signal and tail light fuses were blown. Thanks!
Never had to look at them, im guessing under the seat.
Never had to look at them, im guessing under the seat.
Or under the left side cover, near the tool kit. I'm just guessing, let us know if you still can't find it. Good luck! Jevers
  • Like
Reactions: 1
Or under the left side cover, near the tool kit. I'm just guessing, let us know if you still can't find it. Good luck! Jevers
I've got the thing partly disassembled, I'll give it a look tomorrow. Thanks Jevers. Can't wait til the 31t gets here. So in the meantime I'm exploring the bike. 6 weeks in and all I've done is ride it. Tons of fun tons of torque too
  • Like
Reactions: 1
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top